WiFi Mini Camera Mini Full HD 4K P2P Motion Detection

Description

DIY WiFi Mini Camera Mini WiFi Camera Full HD 4K Camcorder P2P Motion Detection Video Security IP Camera

Attention

1. Only supports 2.4G WIFI network, not support 5G WIFI.

2. Before first using, we suggest you to charge it for 4-6 hours, as it will be offline or doesn’t work.

3. Please connect with USB adapter if you want to monitor 7/24 day.

4. Built-in antenna, its size is smaller. So that we can put it wherever we want.

5. Any questions, please do not hesitate to contact us, we will reply to you as soon as possible and do our best to help you solve the problem.

Functions:

Pixel:1200 Mega CMOS

Resolution Ratio:4K/2K/1080P/720P

Video Format:AVI

Frame Number:25fps

Visual Angle:90 degree

Battery Capacity: 1000mAh

Motion Detection:Camera Shooting

Compressed Format:H.264

Consumption:240MA/3.7V

Storage Temperature:-20-80 degree centigrade

Operating Temperature:-10 to 60 degree centigrade

Operation Humidity:15-85%RH

Memory Card Type:Micro SD card

Maximum capacity of memory card:64GB

Player Software:media player

Mobile Phone Operating System:Android/iOS

Phone can connect max 4pcs Clock cameras at the same time

Package Include:

1*Mini Camera

1*USB Charging Cable

1*Instruction

This camera does not contain lithium batteries. It can be used with  power bank or with power adapter

Note:

1.This camera is not allowed in China. Chinese version of mobile phone is prohibited. Please use other version of mobile phone.

2.At present,the camera supports 802.11b/g/n protocol 2.4G WiFi,5G WiFi is not supported.Please make sure that is through 2.4G connection between mobile phones and the router.

FAQ

Q:How to store a video camera?

A:Currently,the camera support FAT16G format Class10 TF Card,max supports 64G.When the TF Card is full,it will delete earlier video automatically and loop recording.

Q:The camera be offline,how to do?

A:Check the power and WiFi.

Restart the camera.

Reconfigure the camera.

Check the home broadband network.

Q:How to switch network environment?

A:When using in the new network environment,please long press the reset button(SET) for 6～ 8 seconds release the button.It means that restored to factory setting successfully.Then you can start to connect network configuration again.